10°C HeatingIn the heating process, the temperature can be set to increase gradually from 1°C to 10°C.
ACOThe air conditioner automatically switches from heating mode to cooling mode and vice versa to maintain the desired temperature.
Automatic restartExtremely useful during power outages. When it recovers, the air conditioner turns on automatically.
Automatic ventilation modeThe airflow strength setting automatically adjusts the ventilation speed of the indoor unit according to the temperature conditions in the room.
Built-in "Weekly Timer" FunctionEasy setting of the desired temperature and the time of turning on and off the air conditioner in accordance with your lifestyle. Limit energy waste by using the timer to prevent the air conditioner from running excessively in case you forget to turn it off.
Circulation modeAfter reaching the set temperature in heating mode, the air conditioner automatically switches to Circulation mode, which mixes the warm air in the room.
Cleaning-free Pipe ReuseAllows the use of the same pipes, as well as easy replacement of air conditioning systems using R22 or R410 refrigerant.
Connection with conesIt is possible to connect to the cooling pipelines through cones.
Control PAR-33MAA/PAC-YT52CRAThe air conditioners are compatible with a remote control type PAR-33MAA or PAC-YT52CRA, which has multiple control functions.
Cooling to low temperaturesIntelligent control of the ventilation power of the outdoor unit ensures optimal performance even when the outdoor temperature is low.
DC Fan MotorA high efficiency DC motor drives the outdoor unit fan. The efficiency is much higher than the equivalent AC motor.
DC InverterMitsubishi Electric inverters provide optimal control of the operating frequency. As a result, the power in all heating and cooling modes is optimal and maximum comfort is achieved with minimum energy consumption.
Econo cool -E; -ET onlyEcono Cool is an intelligent temperature control feature that adjusts the amount of airflow to the body based on the temperature of the outlet air. The temperature setting can be increased by 2°C without any loss of comfort, therefore achieving a 20% increase in energy efficiency.
Failure recall functionOperation failures are recorded, allowing confirmation when needed.
Joint Lap DC МоторJoint Lap DC Мотор Mitsubishi Electric's unique motor, which in Japan is called the Poki Poki Motor. With its high density, it contributes to significantly high efficiency.
M-NET ConnectionM-NET Connection The air conditioners can be connected to a MELANS system controller (M-NET controller).
Mode "i save"“i save” is a simple function that restores the previous temperature setting of the air conditioner by pressing only one button on the remote control. Press the same button twice again to immediately return to the previous setting. This function contributes to comfortable and economical use by reducing the excess consumption of electricity when, for example, you leave the room or during sleep.
Mode of horizontal swing of the slatIn this mode, the lamella of the air conditioner swings up and down, guaranteeing optimal air distribution in the room.
Mode of vertical swing of the slatThe exhaust fan "swings" from end to end so that the air flow reaches every part of the room.
Night modeThe temperature self-regulates according to sleeping habits.
On/Off TimerUse the remote control to set the on and off times of the air conditioner.
PAM controlPAM is a technology that controls the sinusoidal shape of the current to match that of the voltage. In this way, efficient use of the input power is achieved. Using PAM control, 98% of the consumed power is used efficiently.
Purifying filterThe filter has a large catching surface and aromatizes the circulating air.
Remote control with backlightThe remote control screen is LED-backlit, so you could check the settings even when the room is dark.
Ribbed pipesHigh efficiency finned tubes are used in heat exchangers to increase the heat exchange area.
Self-diagnosisCheck codes are displayed on the remote control screen or operation indicator to inform the user of malfunctions that have occurred.
System management of a group of air conditionersOne remote control is able to control the mode of operation of up to 16 cooling systems.
V Blocking Filter – optionalWith an antiviral effect, it retains 99% of the adhering virus and other harmful substances, such as bacteria, mold and allergens. The double-layer non-woven fabric filter and electrostatic filter can effectively capture and remove small particles from the air in your room
WiFi interfaceThe WiFi interface provides remote control of the air conditioning system using smartphones, tablets or laptops.
MITSUBISHI ELECTRIC MSZ – FT NINJA AIR CONDITIONER
2,599.00лв. – 4,199.00лв.
Unlike conventional air conditioning systems, the FT series do not lose heating capacity when it is cold outside. Original technologies ensure excellent heating performance under extremely low outdoor temperatures and an impressive guaranteed operating range.
Stylish and Compact Design
The FT series features its compact design with 280mm height and 229 mm depth, which is suitable for the installation above the door.
V Blocking filter
V blocking filter with antiviral effect inhibits 99% of adhered virus, and other harmful substances, such as bacteria, mold and allergen. Two-layered filter with non-woven fabric and electrostatic filter can effectively capture and remove small particles from the air in your room.
The powerful compressor and highly cold-resistant components enable the heat pump to deliver up to 100% heating power, even at an outside temperature of -15°C. Guaranteed operating range in heating mode and at outside temperature down to -25°C.
The built-in Wi-Fi adapter allows you to customize your outdoor heating and cooling needs anytime, anywhere, via PC, tablet or smartphone via Mitsubishi Electric’s MELCloud app.