PAM is a technology that controls the current waveform so that it resembles the supply voltage wave, thereby reducing loss and realising more efficient use of electricity. Using PAM control, 98% of the input power supply is used effectively.

Especially useful at the time of power outages, the unit turns back on automatically when power is restored.

Intelligent fan speed control in the outdoor unit ensures optimum performance even when the outside temperature is low.

Use the remote controller to set the times of turning the air conditioner On/Off.

Pure white is adopted for the unit color; white expressing the essence of cleanliness and easily matching virtually all interior decor.

Units can be connected to MELANS system controllers (M-NET controllers).

The air conditioner automatically switches between heating and cooling modes to maintain the desired temperature.

Flare connection to cooling pipework is possible.

Check codes are displayed on the remote controller or the operation indicator to inform the user of malfunctions detected.

The air outlet fin swings from side to side so that the airflow is spread evenly throughout the room.

Operation failures are recorded, allowing confirmation when needed.

Enables smooth and easy recovery of refrigerant.

The same remote controller is capable of controlling the operational status of up to 16 refrigerant systems.

The wiring method has been improved, making it possible to use methods different from that utilized for control and power supply.

Multiple indoor units can be connected to a single outdoor unit.

System operation can be adjusted to prioritise less noise from the outdoor unit over air conditioning performance.

A highly efficient DC motor drives the fan of the outdoor unit. Efficiency is much higher than an equivalent AC motor.

Interface enabling users to control air conditioners and check operating status via devices such as personal computers, tablets and smartphones.

It is possible to reuse the same piping. It allows cleaning-free renewal of air conditioning systems that use R22 or R410 refrigerant.

Mitsubishi Electric inverters ensure superior performance including the optimum control of operation frequency. As a result, optimum power is applied in all heating/cooling ranges and maximum comfort is achieved while consuming minimal energy.

High-performance grooved piping is used in heat exchangers to in-crease the heat exchange area.

Air conditioner operating time is monitored, and the user is notified when filter maintenance is necessary.

This inverter monitors the varying compressor motor frequency and creates the most efficient waveform for the motor speed. As the result, operating efficiency in all speed ranges is improved, less power is used and annual electricity cost is reduced.

Powerful neodymium magnets are used in the rotor of the reluctance DC motor. More efficient operation is realised by strong magnetic and reluctance torques produced by the magnets.

Higher efficiency has been achieved by adding a frame compliance mechanism to the DC scroll compressor. The mechanism allows movement in the axial direction of the frame supporting the cradle scroll, thereby greatly reducing leakage and friction loss, and ensuring extremely high efficiency at all speeds.

This drive device is actually a microprocessor that converts the compressor motor’s electrical current waveform from a conventional waveform to a sine wave (180°conductance) to achieve higher efficiency by raising the motor winding utilisation ratio and reducing energy loss.

The demand function can be activated when the unit is equipped with a commercially available timer or an On/Off switch is added to the CNDM connector (option) on the control board of the outdoor unit. Energy consumption can be reduced up to 100% of the normal consumption according to the signal input from outside.

[Example; Power Inverter Series]

Limit energy consumption by changing the settings of SW7-1, SW2 and SW3 on the control board of the unit. The following settings are possible:

A special process for the entrapment surface improves the filtering effect, making the maintenance cycle longer than that of units equipped with conventional filters.