PAM is a technology that controls the current waveform so that it resembles the supply voltage wave, thereby reducing loss and realising more efficient use of electricity. Using PAM control, 98% of the input power supply is used effectively.

Econo Cool is an intelligent temperature control feature that adjusts the amount of air directed towards the body based on the air-outlet temperature. The setting temperature can be raised by as much as 2°C without any loss in comfort, thereby realising a 20% gain in energy efficiency.

Especially useful at the time of power outages, the unit turns back on automatically when power is restored.

Intelligent fan speed control in the outdoor unit ensures optimum performance even when the outside temperature is low.

Use the remote controller to set the times of turning the air conditioner On/Off.

Easily set desired temperatures and operation start/stop times to match lifestyle patterns. Reduce wasted energy consumption by using the timer to prevent forgetting to turn off the unit and eliminate temperature setting adjustments.

Units are compatible for use with the PAR-33MAA or PAC-YT52CRA remote controller, which has a variety of management functions.

Units can be connected to the MAC-821SC-E centralised remote controller, which can control the On/Off function for a maximum of eight indoor units.

Connection to the MXZ multi-split outdoor unit is possible.

The air conditioner automatically switches between heating and cooling modes to maintain the desired temperature.

Flare connection to cooling pipework is possible.

Check codes are displayed on the remote controller or the operation indicator to inform the user of malfunctions detected.

The vane closes automatically when the air conditioner is not running, concealing the air outlet and creating a flat surface that is aesthetically appealing.

The air outlet fin swings from side to side so that the airflow is spread evenly throughout the room.

Operation failures are recorded, allowing confirmation when needed.

Mitsubishi Electric has developed a unique motor, called the “Poki-Poki Motor” in Japan. With its high density it contributes to extremely high efficiency.

"i save" is a simplified setting function that recalls the preferred (preset) temperature by pressing a single button on the remote controller. Press the same button twice in repetition to immediately return to the previous temperature setting. Using this function contributes to comfortable waste-free operation, realising the most suitable air conditioning settings and saving on power consumption when, for example, leaving the room or going to bed.

The airflow speed mode adjusts the fan speed of the indoor unit automatically according to the present room conditions.

The same remote controller is capable of controlling the operational status of up to 16 refrigerant systems.

A highly efficient DC motor drives the fan of the outdoor unit. Efficiency is much higher than an equivalent AC motor.

Interface enabling users to control air conditioners and check operating status via devices such as personal computers, tablets and smartphones.

It is possible to reuse the same piping. It allows cleaning-free renewal of air conditioning systems that use R22 or R410 refrigerant.

Mitsubishi Electric inverters ensure superior performance including the optimum control of operation frequency. As a result, optimum power is applied in all heating/cooling ranges and maximum comfort is achieved while consuming minimal energy.

High-performance grooved piping is used in heat exchangers to in-crease the heat exchange area.

The filter has a large capture area and deodorizes the circulating air.

With antiviral effect inhibits 99% of adhered virus, and other harmful substances, such as bacteria, mold and allergen.

Two-layered filter with non-woven fabric and electrostatic filter can effectively capture and remove small particles from the air in your room.